Skip to main content

Entry 25 : Adding Guides and Tutorials

This entry will be discussing about the method of guides and tutorials which based from the Beta Test results

The testers mentioned that one stage with large text that ordered the players to do an action was pretty good but Yi Wei is quite disagree with texts as part of tutorial. Thus, he suggested icons first then texts when players are stuck for more than a specific amount of time.

Heeding his words, I've made icons with a sketchy look to interpret robots are having loud thoughts of solutions.


I've programmed the game to display the icons when the players are stuck for more than 5 minutes then text when more than 10 minutes.

Comments

Post a Comment

Popular posts from this blog

Entry 21 : Building The Crank - 3D printing

This entry will be discussing about the continuity development for decorating the MO-3 crank. I've 3D modelled 3 items for printings: - 2 Handles (UpDown and LeftRight) - KEV-7 Leap Motion holder I took atleast 2 days prototyping the size of the 3D printed prototypes to see if it fits in the crank's handle. It took few prototype to find the correct scale. After settled with the correct scale, I've loaded up the Tronxy X1 3D printer with the handles. The first print was a success while not so for the other print. It was too big and technical error that causes the model to be displaced in layers. Thus, I loaded the same model and printed it again. It failed due to knotted 3D filaments. Third try was a success. Total it took 2 full nights to fully print 2 handles. After that I've loaded KEV-7 Leap Motion holder into a bigger 3D printer (beside FabLab's main Mac) and start printing the model. Due to too much pink 3D filaments, Ron and I decided to use the p...
Post a Comment
Read more